Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Hyundai Getz

Model: Hyundai Getz MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

Video tutorial

This guide will show you the instructions to remove and replace the front door panel of the Hyundai Getz. First, open the front door and begin unscrewing the fixing screws located on the sides and the handle of the door panel; then use a lever to detach the panel from the door, as illustrated in the video.

At this point, disconnect the electrical connector of the switch panel and the handle cable; all that remains is to reassemble everything by applying the reverse procedure of disassembly!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on the Hyundai Getz?
How to Remove the Door Panel on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) As shown in this tutorial, removing the door panel on the Hyundai Getz is a very simple and quick operation. First, go inside the cabin, then using a…
How to Remove the Tailgate Panel on the Hyundai Getz?
How to Remove the Tailgate Panel on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) As you can see in this tutorial, removing the tailgate panel on the Hyundai Getz is an extremely simple and quick operation. Start by fully opening t…
Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos