Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Fuse box

Hyundai Getz - Fuse box

Hyundai Getz (2002-2011 / )
Where are the fuses located in the Hyundai Getz?
The fuses of the Hyundai Getz are divided into specific fuse boxes that are installed on the vehicle: in this type of vehicle it will be possible to find two …read all…
Posted on 18 May 2024 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
Location of the fuse box of the Hyundai Getz
When working on the electrical system of the Hyundai Getz, it is important to know the location of the fuse boxes in order to carry out the necessary checks …read all…
Posted on 11 March 2024 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
Hyundai Getz fuse diagram
On this car model there are two fuse boxes, the first is located in the passenger compartment on the left side of the steering column at the bottom near the …read all…
Posted on 7 May 2023 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
Where is the fuse box on the hyundai getz
Before finding out exactly where the fuse box of your Hyundai Getz is located, we remind you that any maintenance or replacement on the fuses must be carried …read all…
Posted on 19 April 2023 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
Where are the Hyundai Getz fuses located?
The fuses of the Hyundai Getz are located inside the two fuse boxes that are installed inside the vehicle: in this model of car there are two of them. The …read all…
Posted on 20 April 2024 by ScegliAuto
Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos