Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Where are the fuses located in the Hyundai Getz?

Hyundai Getz - Video tutorial

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Fuse box
Operation: Where are the fuses located in the Hyundai Getz?

The fuses of the Hyundai Getz are divided into specific fuse boxes that are installed on the vehicle: in this type of vehicle it will be possible to find two boxes for containing the fuses. The first one will be located in the lower left part of the dashboard compared to the steering column: this contains the fuses that regulate the operation of the interior lights, the instrument panel, the radio, etc. The second box will instead be located on the right side of the engine compartment: it contains the fuses for the low beam headlights, the windshield wipers, the radiator fan, etc.


Posted on 18 May 2024 by ScegliAuto



Where are the Hyundai Getz fuses located?
Hyundai Getz (2002-2011 / MK 1) The fuses of the Hyundai Getz are located inside the two fuse boxes that are installed inside the vehicle: in this model of car there are two of them
Where is the OBD2 port located on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) If you want to locate the OBD2 port in your Hyundai Getz on your own, all you have to do is follow these simple steps. First, reach the driver's seat
Where is the fuse box on the hyundai getz
Hyundai Getz (2002-2011 / MK 1) Before finding out exactly where the fuse box of your Hyundai Getz is located, we remind you that any maintenance or replacement on the fuses must be

Other guides that may interest you

    Frequently Asked Questions

    • Getz 2002-2011 - Where is the fuel pump fuse located on the Hyundai Getz? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos