Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Boxes in the Hyundai Getz

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Fuse box

When working on the electrical system of the Hyundai Getz, it is important to know the location of the fuse boxes to carry out necessary checks and replace any blown components. The first fuse box is located at the bottom of the dashboard under the steering wheel, on the left, protected by a plastic cover. The second fuse box is located inside the engine compartment, on the driver's side, between the battery and the wheel arch, covered by a plastic lid. To quickly identify the fuse you need, refer to the attached wiring diagram.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses on the Hyundai Getz?
Where are the Fuses on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) The fuses on the Hyundai Getz are located inside two fuse boxes installed within the vehicle: this model has two. The first is positioned inside the …
Where to Find the Fuse Box on the Hyundai Getz
Where to Find the Fuse Box on the Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Before locating the fuse box on your Hyundai Getz, remember that any maintenance or replacement of fuses must be done with the engine off and the bat…
Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos