Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box on the Hyundai Getz

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Fuse box

Before locating the fuse box on your Hyundai Getz, remember that any maintenance or replacement of fuses must be done with the engine off and the battery disconnected for safety reasons. Go to the front of the car and fully lift the bonnet. Locate a small black box on the right side (driver's side) and remove the protective cover. Just below, you will have access to all the fuses, and you will also find the corresponding diagram on the underside of the cover.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of the Fuse Boxes in the Hyundai Getz
Location of the Fuse Boxes in the Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) When working on the electrical system of the Hyundai Getz, it is important to know the location of the fuse boxes to carry out necessary checks and r…
Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
Where are the fuses located in the Hyundai Getz?
Where are the fuses located in the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) The fuses of the Hyundai Getz are divided into specific fuse boxes that are installed on the vehicle: in this type of vehicle it will be possible to …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos