Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A Trick to Clear the ETC Light on the Hyundai i30 Dashboard

Model: Hyundai I30 GD, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

In this video, you can see a simple trick to turn off the ETC (Electronic Stability Control) light that remains illuminated on the dashboard of your Hyundai i30: first, ensure there are no ongoing issues with the system and that it is merely a matter of turning off the light.

This is crucial for your safety and that of your passengers.

Normally, you would need to reset it using a diagnostic tool, such as an OBD11, but if you prefer to avoid the cost of this device, you can proceed as follows. Insert the key into the ignition and turn it five times.

Then remove it and place it outside the car. Wait for 15 to 20 seconds and then turn the ignition back on. You will see that the light has turned off.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

Reset the Service Light on the Hyundai I30
Reset the Service Light on the Hyundai I30
Hyundai I30 (2016-2024 / MK 3, PD) Today, follow the procedure to reset the service light for the regular maintenance oil change on the Hyundai I30. First, get into the vehicle and tur…
How to Reset the Service Light on the 2022 Hyundai i30
How to Reset the Service Light on the 2022 Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) Resetting the service light on the 2022 Hyundai i30 is very simple and can be done independently. This reset is performed after each service, whether…
How to reset the Service light on a Hyundai i30?
How to reset the Service light on a Hyundai i30?
Hyundai I30 (2011-2016 / GD, MK 2) To reset the Service light on the instrument cluster of the Hyundai i30, insert the key and turn it to start the instrument cluster. Then navigate th…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos