Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Hyundai i10?

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Rear bumper

See other generations:
Video tutorial

In this tutorial, see how to remove the rear bumper on a Hyundai i10, a very simple and quick operation. First, open the boot.

Next, locate the screws along the inner edges of the lights and unscrew them using a standard cross-head screwdriver. Then, separate the lights from the bodywork, unscrew all remaining fixing screws located both inside the wheel arches and on the lower edge, and, gripping it from one end, detach the bumper from the frame.

To fit a replacement, simply follow the reverse procedure.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper on a Hyundai i10
Removing the Rear Bumper on a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) Is the rear bumper damaged? Let’s remove and replace it on a Hyundai i10. Using a screwdriver or battery-powered drill, unscrew the retaining screws …
How to Remove Front Bumper on Hyundai i10
How to Remove Front Bumper on Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) Is the front bumper broken? Remove it from the front of a Hyundai i10. Lift the bonnet and secure it. Use a socket spanner to undo the fastening scre…
Replacement of the front headlight of the Hyundai I10
Replacement of the front headlight of the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Today we will see the instructions for disassembling and replacing the front headlight of the Hyundai I10. First, we open the hood of the car and sta…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos