Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on a Hyundai Kona?

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
This video is currently unavailable

To reset the tire pressure light of a Hyundai Kona, start by turning on the instrument panel without starting the engine. Use the central screen of the multimedia system to access the vehicle settings menu.

From the main menu, select the section dedicated to "Vehicle Settings" and then look for the option related to tire pressure monitoring (TPMS). Once you have found the option, select the reset or calibration function. Confirm the operation following the instructions that will appear on the screen.

After performing the reset, it is advisable to drive the vehicle for a few kilometers so that the system can acquire the new pressure parameters. Make sure that the tires are inflated to the recommended pressure indicated in the owner's manual or on the label located inside the driver's door frame.

If the light does not turn off, it may be necessary to check for any system malfunctions or check for damage to the tires themselves.


Posted on 30 December 2024 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Hyundai Kona?
How do you reset the tire pressure light on the Hyundai Kona?
Hyundai Kona (2023-2026 / MK 2) In order to reset the tire pressure warning light of the Hyundai Kona, you will need to inflate the tires until they are inflated to the recommended …
How do you reset the tire pressure light of the Hyundai Kona?
How do you reset the tire pressure light of the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In order to reset the tire pressure light of the Hyundai Kona, you need to inflate the tires until they reach the recommended pressure value: this va…
How do you reset the tire pressure light on the Hyundai Kona?
How do you reset the tire pressure light on the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In order to reset the tire pressure warning light of the Hyundai Kona, you need to inflate the tires until they reach the correct pressure value: thi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos