Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How does the tire inflation system of the Hyundai Kona work?

Model: Hyundai Kona MK 2 - Years 2023-2026
Part: Tires

The tire pressure monitoring system of the Hyundai Kona constantly monitors the pressure of each tire through wireless sensors positioned in the valves, and alerts the driver through a light on the dashboard if the pressure of one or more tires is too low (or too high). The video shows the procedure for inflating the tires. We find the correct pressure, which is indicated on a sticker located on the driver's side door pillar. In this case, reference is made to a pressure measured in PSI (pounds per square inch) which is used in Anglo-Saxon countries. Connect the inflator, remove the tire valve cap, screw it tightly onto the valve: we will hear a slight hiss of air until it is well tightened; set the pressure to the desired level and inflate. The inflator will automatically stop when it reaches the set pressure, emitting a beep. Immediately put the cap back on the valve and repeat with the other tires. If the TPMS light remains on after a short drive, we can manually reset it through the settings of the onboard computer (starting from "vehicle").

Posted on 14 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How does the MyCharge app for Hyundai Kona work?
Hyundai Kona (2023-2026 / MK 2) In this video we see how the MyCharge app works for a Hyundai Kona-e. This is an application designed by Hyundai for those who rightly ask themselves…
How to Replace the Air Filter on a Hyundai Kona?
How to Replace the Air Filter on a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) To replace the air filter on a Hyundai Kona, open the bonnet to access the components within the engine bay. The air filter box is located at the bot…
How to Replace the Remote Battery in a Hyundai Kona?
How to Replace the Remote Battery in a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) To replace the battery in the remote control of a Hyundai Kona, pull the lever located at the top of the device so that the key can be extracted from…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos