|
Do it yourself
| |||
| ||||
How to replace the battery of the Hyundai Tucson MK2
Model: Hyundai Tucson
LM, MK 2
- Years 2010-2015
In this video, we can see how to replace the battery of the Hyundai Tucson MK2: we open the engine compartment by pulling the hood release lever and then lift it up using the lever located just above the Hyundai emblem, placing the rod in the slot marked by the arrow. The battery is located in the hood, on the right side, and we will need a 10mm wrench and a socket of the same size, as well as a ratchet with a 12mm extension. First, we disconnect the negative terminal, the black one, which we will safely store. Same procedure for the positive red terminal. Now we need to remove the 12mm safety bolt at the bottom, for which we will need the extension; we remove the air filter cover to work better, then remove the battery protection and finally grab it by the handle and pull it away. Clean the base and place the new battery in its place, put the cover back on and then the safety bolt. Replace the air filter cover and reconnect the terminals: first the positive red one and finally the negative black one. Job done.
Posted on 16 January 2025 by ScegliAuto
Video tutorial
Related tutorials
Hyundai Tucson
(2015-2021 /
TL, MK 3)
To be able to replace the battery inside the key of your third-generation Hyundai Tucson by yourself, just follow the procedure described in this new…
Hyundai Tucson
(2010-2015 /
LM, MK 2)
Today we will explain how to replace the battery of the remote control of the Hyundai Tucson, model produced from 2010 to 2015. To replace the key ba…
Hyundai Tucson
(2004-2009 /
JM, MK 1)
In a few simple steps, we will see how to disassemble and replace the battery of the Hyundai Tucson vehicle, following the instructions below. First,…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.183
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |