Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Hyundai Tucson parking brake button

Model: Hyundai Tucson TL, MK 3 - Years 2015-2021
Part: Parking brake

In this video, we will see how to change the parking brake button of the Huyndai Tucson: we start by pulling up the gear shift boot, then we lever on the rear side of the center console in order to remove the whole block with the cup holder, which we will remove by taking it off the gear shift lever. Now we flip the part over and disconnect the electrical connectors, and unscrew the part related to the electronic brake. We can find the replacement buttons, for example, on Amazon with the code B0CSCLRHZR, priced at 94.33 euros, with free delivery. Once the replacement is done, we reconnect the connectors and put the complete component back in place.

Posted on 17 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Tucson (2015-2021 / TL, MK 3) If you need to intervene on the fuses of your third edition Hyundai Tucson, but you don't know where they are located, then all you have to do is rea…
Hyundai Tucson (2022-2026 / NX4, MK 4) Today we will explain how to reset the service light of the Hyundai Tucson. To reset the light, we need to press the brake pedal while turning on the…
Hyundai Tucson (2015-2021 / TL, MK 3) In order to adjust the handbrake of the Hyundai Tucson, you need to completely remove the covering of the central tunnel, loosening the screws and un…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos