Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Cabin Air Filter on Hyundai I20

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part: Cabin air filter

Learn how to remove and replace the cabin air filter (pollen filter) on a Hyundai I20. Open the glove compartment and detach the end stop brackets of the compartment, then unscrew the securing screws with a screwdriver (if present). After completing the previous steps, pull the glove compartment away from the dashboard; remove the plastic cover (cap) and slide the air filter out (as shown in the video). Insert the new filter (of the same size) and reassemble all components of the glove compartment as you disassembled them.

Updated on 5 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replace Cabin Air Filters on I20
Replace Cabin Air Filters on I20
Hyundai I20 (2008-2014 / MK 1, PB) Replace the cabin air filter on a Hyundai? Remove the air filter located under the right dashboard (central tunnel side), let's see the disassembly. …
Location and Procedure for Replacing the Cabin Air Filter on the Hyundai i20 Mk2
Location and Procedure for Replacing the Cabin Air Filter on the Hyundai i20 Mk2
Hyundai I20 (2014-2021 / GB, IB, MK 2) This guide shows the location and procedure for replacing the cabin air filter on the Hyundai i20 Mk2. The first step is to remove the glove compartm…
How to Replace the Air Conditioning Filter on a Hyundai I20
How to Replace the Air Conditioning Filter on a Hyundai I20
Hyundai I20 (2014-2021 / GB, IB, MK 2) In this video, we will see how to replace the cabin air filter on a Hyundai I20: in this case, it is a right-hand drive vehicle, but the position of …

Other guides you may be interested in

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - Where is the pollen filter on the Hyundai I20? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos