Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin filter of the Hyundai IX20?

Model: Hyundai ix20 OJ - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

Video tutorial

The cabin filter of the Hyundai IX2 can be completely replaced by opening the glove compartment located on the passenger side, so that it is possible to loosen the screws at the top that secure the compartment inside the dashboard: at this point it will be possible to completely remove it to open the filter box at the back.

Then, you will need to continue by removing the cabin filter from its corresponding housing so that it is possible to insert the new replacement piece.

After installation, the glove compartment can be repositioned by checking its operation.


Posted on 5 November 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Hyundai iX20
How to Replace the Cabin Air Filter on a Hyundai iX20
Hyundai ix20 (2010-2019 / OJ) Before you can start, sit in the front passenger seat of your Hyundai iX20. Begin by opening the glove compartment door. Next, unscrew and remove the…
How to Replace the Cabin Filter on a Hyundai IX20
How to Replace the Cabin Filter on a Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) If you own a Hyundai IX20 and want to replace the cabin air filter yourself, simply follow the steps outlined in this mini guide. First, go to the pa…
Replacing the Cabin Air Filter of the Hyundai Ix20
Replacing the Cabin Air Filter of the Hyundai Ix20
Hyundai ix20 (2010-2019 / OJ) This guide explains how to remove and replace the cabin air filter or pollen filter of the Hyundai Ix20, following the instructions below. First, get…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos