Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Front Headlamp Fitted on a Hyundai I20

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

Do you want to remove the front headlamp fitted on a Hyundai I20? Follow these steps to proceed with the removal. Open the bonnet by pulling the release lever and secure it. Unscrew the retaining bolts at the top of the headlamp (using a socket or battery-powered screwdriver).

Disconnect the bulb holder from the headlamp and remove the headlamp from the vehicle body. Fit the new headlamp with new bulbs if damaged (ensure they are the correct type and size) and insert the headlamp into its housing.

Finally, tighten the bolts on the headlamp above the plastic trim. Test the lights to ensure they function correctly.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace Front Headlight Bulb on Hyundai I10
How to Replace Front Headlight Bulb on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this very simple video guide, you will learn how to remove the front headlight bulb of a Hyundai I10. The removal process takes a few minutes and …
How to Remove the Rear Light on a Hyundai I10
How to Remove the Rear Light on a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Remove the rear light of the car if you want to replace it or change the bulbs inside. Lift the boot lid, unscrew the securing screws located at the …
Replacing Headlight Bulbs on Hyundai I10
Replacing Headlight Bulbs on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Are the bulbs in your Hyundai I10 damaged? Here’s how to change them inside the front headlight. Open the front bonnet by pulling the lever located a…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos