Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Ioniq
    4. : How to remove the rear light of a Hyundai Ioniq

Hyundai Ioniq - Video tutorial

Model: Hyundai Ioniq MK 1 - Years 2016-2022
Part: Tail light
Operation: How to remove the rear light of a Hyundai Ioniq

Your car's rear light bulbs no longer work? Let's see how to replace damaged bulbs on a Hyundi Ioniq. We open the bonnet of the luggage compartment, with a screwdriver we unscrew (with a socket wrench or screwdriver with insert) the locking pins located on the side of the rear light; as soon as the headlight is free from any constraints, we can detach it from the bodywork (disconnect the relative power supply terminals). We replace damaged bulbs with pieces of the same size and voltage. Finally we go to reassemble the lighthouse in the dedicated housing and proceed backwards in the assembly of the other pieces.


Posted on 16 November 2023 by ScegliAuto



The location of the fuse boxes on the Hyundai Ioniq.
Hyundai Ioniq (2016-2022 / MK 1) In this video tutorial, we can see where the fuse boxes are located on a Hyundai Ioniq, following some simple steps that will help you manage your ca
How do you reset the tire pressure warning light on the Hyundai Ioniq?
Hyundai Ioniq (2016-2022 / MK 1) In order to reset the tire pressure light on the Hyundai Ioniq, you must first inflate the tires to the correct pressure value, which is indicated on
How to replace the remote control battery of Hyundai Ioniq?
Hyundai Ioniq (2016-2022 / MK 1) In this tutorial we can see how to replace the Hyundai Ioniq remote control battery. For this simple and fast operation we will not need any particul

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos