Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate the Fuses in a Hyundai IX25 Creta

Model: Hyundai Ix25 Creta MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fuse box

See other generations:
Video tutorial

To locate the fuses in a first-generation Hyundai IX25/Creta, check two main boxes. The fuse box in the cabin is located on the driver's side, at the bottom of the dashboard.

Open the corresponding cover panel to access the fuses for various internal devices. The second box is found in the engine compartment, near the battery, inside a black plastic container.

Press the locking tabs and lift the cover to reach the fuses and relays. Before performing any checks, turn off the ignition and all electrical devices.

To identify the desired fuse, consult the diagram on the cover of the box or in the vehicle's manual. If a fuse has a broken filament, use tweezers to remove it and replace it with a new one of the same amperage.


Posted on 8 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Hyundai IX25 Creta
How to Remove the Front Door Panel of the Hyundai IX25 Creta
Hyundai Ix25 Creta (2014-2020 / MK 1) Today's guide shows you how to remove the front door panel of the Hyundai IX25 Creta. First, open the front door of your car and start removing the s…
How to Reset the Service Light on the Hyundai IX25 Creta
How to Reset the Service Light on the Hyundai IX25 Creta
Hyundai Ix25 Creta (2019-2026 / MK 2) In this mini guide for the Hyundai IX25 Creta, you will learn how to correctly perform a manual reset of the service light (or maintenance light) on …
How to Replace the Cabin Air Filter on a Hyundai Ix25 Creta
How to Replace the Cabin Air Filter on a Hyundai Ix25 Creta
Hyundai Ix25 Creta (2014-2020 / MK 1) This guide provides the main instructions for replacing the cabin air filter on a Hyundai Ix25 Creta. First, get inside the vehicle on the passenger …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos