|
Do it yourself
| |||
| ||||
How to Replace the Damaged Rubber Button on a Hyundai IX 25/IX35 Remote
Model: Hyundai ix35
MK 1
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015
Video tutorial
On Hyundai remotes, the rubber buttons can crumble with use. Instead of buying a new (expensive) remote, you can just replace the rubber pad, available on Amazon with code B0H664574Z for £6.99 for two pieces, with free delivery. Remove the old rubber with a small flat screwdriver; it will come out in pieces. Inside, you will find a silver frame and a central plastic structure: it is advisable to remove both, otherwise the new rubber will remain raised. Clean the seat thoroughly of any rubber residue and dirt. Insert the silver frame and test the new rubber dry to ensure it fits well and does not protrude. Apply a thin layer of glue (some recommend super glue or hot glue) around the edge where the frame goes, insert it, then put a bit of glue where the rubber goes and press gently, ensuring it is flush and that no glue oozes out. Test the buttons. On some models, the aftermarket rubber may not fit perfectly and may require slight trimming or a bit more glue.
Posted on 19 November 2026 by ScegliAuto
Related tutorials
Hyundai ix35
(2009-2015 /
MK 1)
The rubber button on this Hyundai IX35 remote has crumbled, but we can easily replace it. You can buy the rubber buttons on Amazon using code B0F93V9…
Hyundai ix35
(2009-2015 /
MK 1)
In this tutorial we can see how to replace the battery of the Hyundai IX35 remote control, an extremely simple and fast operation. To do this we need…
Hyundai ix35
(2009-2015 /
MK 1)
Follow these main instructions to disassemble and open the remote, allowing you to replace the battery inside the Hyundai IX35. First, take the remot…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
What to Do If the Boot of the Opel Insignia Won't Open?
If the boot of your Opel Insignia won't open, for example due to a fault with the lock actuator or the corresponding control button, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the right rear door, then fully lower the backrest of the seat by operating the respective lever. Next, go inside the boot, locate the indicated gap, and using a screwdriver, manually unlock the lock. At this point, you can open the tailgate and repair the faulty component. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |