Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Hyundai Santa Fe battery replacement

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Battery
Operation: Hyundai Santa Fe battery replacement

In this video tutorial we will show you how to replace the Hyundai Santa Fe battery. First of all, open the engine hood from the inside and remove the protective plastic from the battery terminals: then let's unscrew the battery pole terminals and disconnect them. At this point we have to remove the bracket bolt: to do this we have to equip ourselves with a socket wrench with extension so that we can get there since it is located at the bottom. Then we proceed with the extraction of the battery and the reassembly of the new one! Replace only with good quality battery!


Posted on 10 December 2023 by ScegliAuto



How to replace the battery of the Hyundai Santa Fe remote control?
Hyundai Santa Fe (2019-2024 / MK 4, TM) In this tutorial, we can see how to replace the battery of the Hyundai Santa Fe remote control, a very simple and quick operation. To do this, we wil
Where is the fuse box located in the 2009 Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) In this new mini guide dedicated to all of you who own a second-generation Hyundai Santa Fe (year 2009), we will discover the steps you need to take
How to replace the remote control battery of Hyundai Santa Fe?
Hyundai Santa Fe (2012-2018 / MK 3) Replacing the remote control battery of the Hyundai Santa Fe is very simple, let's see how to proceed in this tutorial. We need a small flat-tip scre

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos