Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Disassembly of Front Headlamp

Model: Hyundai Genesis BH - Years 2008-2016
Part: Headlight

To completely disassemble the front lighting unit, open the bonnet and remove the two screws that secure the headlamp. Carefully slide the headlamp group out of its housing by pulling it towards the outside. Remove the protective cap and then the electrical connector. Remove the lamp retaining spring by gently pulling it to detach it from the lamp holder. Install the new lamp without touching the glass bulb with your hands. Reassemble the lamp holder in its respective housing and reposition the headlamp group in its compartment, closing the plastic cap first and securing it with the two clips.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling and Cleaning the Front Headlamp
Hyundai Genesis (2008-2016 / BH) If dirt or impurities have entered the headlamp, it can be disassembled for cleaning. Open the bonnet and locate the rear of the headlamp. Gently rem…
How to Replace the Headlight on the Hyundai Genesis?
How to Replace the Headlight on the Hyundai Genesis?
Hyundai Genesis (2008-2016 / BH) It is easy to understand how to remove and replace the headlight, in this case, the front one, on the Hyundai Genesis, as the process is quite clear …
Installing LED Rear Lamp
Installing LED Rear Lamp
Hyundai Genesis (2008-2016 / BH) To carry out this modification, first remove the rear lamps from the vehicle and, once placed on a workbench, completely disassemble them to install …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos