Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to change the air conditioning filter on an Elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra HD, MK 4 - Years 2006-2010
Part: Cabin air filter
Operation: How to change the air conditioning filter on an Elantra

Do we want to change the Elantra car air conditioning filter? We disassemble the glove box to access the air filter. We open the glove compartment and unhook the round stops on the sides of the drawer. After carrying out the operations mentioned above, we pull the glove box away from the dashboard (downwards). We remove the cabin air filter from the housing as shown in the video. We insert the new filter in the container, we close with the cover the same. We mount the glovebox in the front dashboard, we block the round latches on the sides. We close the glove compartment door at the end of the filter change.


Posted on 23 December 2023 by ScegliAuto



How to replace an air filter on Hyundai Elantra.
Hyundai Elantra (2006-2010 / HD, MK 4) In this video tutorial we can see how it is possible to replace the air filter on Hyundai Elantra, following a few simple steps: the first thing we n
How to replace the air filter on the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) If the engine air filter in your Hyundai Elantra (2015-2020) is excessively worn and you want to replace it yourself, simply follow these steps. Firs
How to replace the air filter on Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In order to replace the air filter on the Hyundai Elantra you have to go and open the hood, so that you have access to the components inside the engi

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos