Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. : Galloper

Replacing the Fuel Filter on Hyundai Galloper

Model: Hyundai Galloper MK 1 - Years: 1999, 2000, 2001, 2002, 2003
Part: Fuel filter

Video tutorial

On the Hyundai Galloper, the fuel filter is located, facing from the bonnet towards the cabin, to your right, near the engine bay. Open the bonnet and use the support rod. If you cannot reach with your hand, disconnect the wiring for the water temperature sensor, as shown in the video.

This will give you more working space and you can simply unscrew the filter by hand.

Now that you have removed it, unscrew the part related to the sensor and screw it onto the new filter you purchased, remembering to replace the O-ring. Refit the filter in its housing.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Fuel Filter Replacement on Hyundai Elantra
Fuel Filter Replacement on Hyundai Elantra
Hyundai Elantra (2006-2010 / MK 4, HD) To remove the fuel filter on a Hyundai Elantra, take out the fuel filter along with the pump. Remove the rear seat cushions, then take off the metal …
How to Replace the Fuel Filter on a Hyundai iX35
How to Replace the Fuel Filter on a Hyundai iX35
Hyundai ix35 (2009-2015 / MK 1) This guide shows how to replace the fuel filter on a Hyundai iX35. The first step is to disconnect the battery, the MAF sensor, the engine air filter…
How to Replace the Fuel Filter in a Hyundai Accent?
How to Replace the Fuel Filter in a Hyundai Accent?
Hyundai Accent (2005-2009 / MK 2, MC) In this tutorial, you will see how to replace the fuel filter in a Hyundai Accent, a very simple and quick operation. First, ensure that the key is n…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos