Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

This guide shows how to remove the front headlamp of a Hyundai I10. First, open the bonnet and secure it in position. Next, unscrew the screws and bolts securing the headlamp to the bodywork.

Some bolts and screws are located on the top of the headlamp, while others are on the inner side of the engine bay. After removing the headlamp fixing screws, you can extract it with a gentle outward pressure on the bumper. Be careful not to pull too hard as you might damage the wiring for the lights.

Replace the bulbs after removing the protective caps from the bulb holders and freeing the back of the bulb from the retaining spring. Reassemble the headlamp in the same way it was removed.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of the Hyundai I10?
How to Remove the Front Headlamp of the Hyundai I10?
Hyundai I10 (2013-2020 / MK 2, IA) To remove the front headlamp of the Hyundai I10, open the bonnet to access the components at the top of the engine bay. Here, you will find the screw…
Removing the Front Headlight on the Hyundai I10 MK1
Removing the Front Headlight on the Hyundai I10 MK1
Hyundai I10 (2007-2013 / PA, MK 1) In this short video, you will learn how to remove the front headlight and replace its bulbs on the Hyundai I10 first series, following these simple s…
How to disassemble the front headlight of the Hyundai i10
How to disassemble the front headlight of the Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) The instructions provided in this guide will show us the procedure for disassembling and replacing the front headlight of the Hyundai I10. First, we …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos