Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch on Hyundai Santa Fe?

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Window switch

See other generations:
Video tutorial

To replace the window switch on the Hyundai Santa Fe, you first need to remove the corresponding door panel. By loosening the screws located on the side of the panel, in the handle's housing, and under the mirror cover, you can slide the panel off and disconnect the connectors inside.

At this point, you can loosen the screws that secure the window switch panel to the door. The new switch panel must be installed by securing it with the appropriate screws, and the panel can then be reassembled.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Window Switch in a Hyundai Santa Fe
How to Replace the Window Switch in a Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) To replace the window switch in a first series Hyundai Santa Fe, you need to remove the door panel as shown in the attached tutorial. To remove the p…
How to Replace the Window Regulator on a Hyundai Santa Fe?
How to Replace the Window Regulator on a Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) To replace the window regulator on a Hyundai Santa Fe, loosen the screws that secure the door panel to its housing. These screws are located at the c…
Where is the OBD2 Port on the Hyundai Santa Fe?
Where is the OBD2 Port on the Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) If you own a first-generation Hyundai Santa Fe and are wondering where the OBD2 port is located for connecting to the ECU, follow the steps described…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos