Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : How do you replace the power window regulator of a Hyundai Santa Fe?

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Checks and maintenance
Operation: How do you replace the power window regulator of a Hyundai Santa Fe?

To replace the window regulator of the Hyundai Santa Fe, you need to loosen the screws that fix the door panel to its housing: these screws are located in the center of the storage compartment and in the center of the inner handle seat. Once the panel has been removed, you can locate the underlying window regulator mechanism: this must be disconnected from the respective connectors and released from the corresponding fixing screws. In this way, you can remove the old mechanism, insert the new one and then cover everything with the panel.


Posted on 22 June 2023 by ScegliAuto



How to replace the wing mirror in Hyundai Santa Fe?
Hyundai Santa Fe (2012-2018 / MK 3) In this tutorial we can see how to replace the outside rear view mirror in Hyundai Santa Fe, an extremely simple and fast operation. First of all, op
How to replace the window switch on the Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) To be able to replace the window switch of the Hyundai Santa Fe, you must first go and remove the corresponding door panel. By loosening the screws l
How to replace the window switch in Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) To replace the window switch in the Hyundai Santa Fe SM first series, the door panel must be removed as we can see from the attached tutorial. To rem

Other guides that may interest you

    Frequently Asked Questions

    • Santa Fe 2006-2012 - What to do if the handbrake of Hyundai Santa Fe 2 is not working? Read Answer
    • Santa Fe 2000-2006 - Where is the jack on the Hyundai Santa Fe? Read Answer
    • Santa Fe 2012-2018 - What are the spies of the Hyundai Santa Fe? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos