Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : How to remove the mirror cover on the Hyundai I30 MK1

Hyundai I30 - Video tutorial

Model: Hyundai I30 FD, MK 1 - Years 2007-2012
Part: Outside rearview mirror
Operation: How to remove the mirror cover on the Hyundai I30 MK1

In today's video we will see the step by step instructions to remove and replace the exterior mirror cap on the Hyundai I30 first series. First of all, let's remove the glass of the external rearview mirror, gently levering the sides to release it; after which we disconnect the connector on the back. At this point we are going to unscrew the screws of the mirror cap, which we find internally, using a Phillips screwdriver; then unscrew the other screw that we find under the mirror to permanently remove the cap, replacing it with the new one!


Posted on 11 March 2024 by ScegliAuto



Remove the mirror from the Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) Do we want to replace the mirror from inside the car mirror? Let's see how the mirror of the Hyundai I30 is removed. We pry between the perimeter of
How to replace the rear view mirror on a Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) We see in this video tutorial the main instructions on how to remove and replace the external rearview mirror on a Hyundai I30 first series. First we
Guide to replace the outside rearview mirror on the Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) Let's see in this short video the steps that will allow us to disassemble and replace the exterior rearview mirror on the Hyundai I30 first series, f

    Frequently Asked Questions

    • I30 2016-2023 - How to replace the exterior mirrors on the Hyundai I30? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos