Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : Removal of front bumper of ua Hyundai Accent

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 4, RB, RC - Years 2010-2017
Part: Front bumper
Operation: Removal of front bumper of ua Hyundai Accent

We don't know how to remove the front bumper? Let's see how the front bumper of a Hyundai Accent is removed. We lift the bonnet and put it in safety, we remove the fastening rivets placed on the plastic parts of the bumper, we go to unscrew the screws above the bumper. Once the screws or fastening rivets in the upper part have been removed, we remove the screws placed in the stone guards (we remove the rivets placed in the side part of the bumper). Remove the bumper from the car body by hand, disconnect any electrical terminals behind the bumper. We fit a new bumper and work backwards.


Posted on 1 April 2024 by ScegliAuto



How to remove Hyundai Accent front fender
Hyundai Accent (2010-2017 / MK 4, RB, RC) How to remove the front bumper of the Hyundai Accent? We lift the front hood of the engine, we identify the screws to be removed on the bumper. We un
How to remove the front bumper on the Hyundai Accent?
Hyundai Accent (2010-2017 / MK 4, RB, RC) Disassembling the front bumper on the Hyundai Accent, as we can see in this tutorial, is an extremely simple and fast operation. Let's start by openi
How to replace the front turn signal bulb in the Hyundai Accent?
Hyundai Accent (2010-2017 / MK 4, RB, RC) As we can see in this tutorial, replacing the front arrow light bulb in the Hyundai Accent is an extremely simple and fast operation. Before doing so

    Frequently Asked Questions

    • Accent 2017-2024 - How much does it cost to replace the bumper of a Hyundai Accent? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos