Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Cruz
    4. : How to install the cover of the Hyundai Santa Cruz

Hyundai Santa Cruz - Video tutorial

Model: Hyundai Santa Cruz MK 1 - Years 2021-2024
Operation: How to install the cover of the Hyundai Santa Cruz

Let's see in this guide how to install the closing kit or the rear cover on the Hyundai Santa Cruz, following the instructions below. First of all, let's move to the rear of the car, getting on board the body; then let's install all the brackets on the sides of the same, fixing them with the screws supplied with the kit, as shown in the video. At this point we are also going to fix the new gaskets, in order to make the cover adhere perfectly; finally we verify that they scroll correctly on the guides, following the video until the end!


Posted on 6 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos