Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Ix25 Creta
  6. : How to replace and install Android car stereo on Hyundai Ix 25 Creta

Hyundai Ix25 Creta - Video tutorial

Model: Hyundai Ix25 Creta MK 1 - Years 2014-2020
Part: Car stereo
Operation: How to replace and install Android car stereo on Hyundai Ix 25 Creta

In today's video tutorial we will see how to disassemble the stock car stereo and how to replace it with a new one of the Android type of the Hyundai Ix 25 Creta. First of all we get on board the car and begin to disassemble and remove the standard car radio; to do this we remove the air vents and disconnect the electrical connectors that we find on the back, as shown in the video. At this point we are going to install the new Android car stereo, making the appropriate changes to the wiring; then we install the air vents again and go to configure the new multimedia system!


Posted on 16 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos