Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix20
    4. : Replacing the pollen filter on a Hyundai Ix 20

Hyundai ix20 - Video tutorial

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Air filter
Operation: Replacing the pollen filter on a Hyundai Ix 20

To change the pollen filter (or cabin filter) on our Hyunday Ix 20, simply open the glove box, located on the passenger side. In the document pocket we must unscrew the two screws on the bottom, in order to remove the whole drawer. To remove it, you will have to grab it from the inside and gently pull it towards you. Behind is the lid of the filter compartment: You have to squeeze the two clips and we have our pollen filter in sight. You will need to remove it from its housing, clean the compartment thoroughly and replace it. Pay close attention to the arrow, which indicates the direction of flow. Now all that remains is to put the cap and drawer back in place. You only have to screw in two screws and everything is fine.


Posted on 10 August 2022 by ScegliAuto



Hyundai Ix20 cabin air filter replacement
Hyundai ix20 (2010-2019 / OJ) Let's find out in this guide how to remove and replace the cabin air filter or the pollen filter of the Hyundai Ix20, following the instructions belo
How to replace the cabin filter of the Hyundai IX20.
Hyundai ix20 (2010-2019 / OJ) If you own a Hyundai ix20 and want to replace the cabin air filter yourself, then all you have to do is follow the steps described in the following m
How to replace the cabin air filter on a Hyundai iX20
Hyundai ix20 (2010-2019 / OJ) Before we can begin, we will have to go and sit in the front passenger seat of our Hyundai iX20. Let's start by opening the door of the glove compart

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos