Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Coils on a Hyundai Elantra

Model: Hyundai Elantra MK 6 - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Ignition coil

See other generations:
Video tutorial

To replace the ignition coils on a Hyundai Elantra, open the bonnet and remove the plastic cover from the top of the engine block. Once this is removed, you will have access to the wires connected to the coils, which need to be disconnected.

After the wires are removed, unscrew the fixing screws of the coils, then extract them from their seats and replace them with new parts. After replacement, reconnect the new coils, inserting and securing them in their seats.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Ignition Coils of the Hyundai Elantra?
How to Replace the Ignition Coils of the Hyundai Elantra?
Hyundai Elantra (2010-2015 / MK 5, MD, UD) To replace the ignition coils of the Hyundai Elantra, lift the bonnet to access the top of the engine block. Here, you will need to detach the plasti…
Ignition Coil Replacement
Ignition Coil Replacement
Hyundai Elantra (2000-2006 / MK 3, XD) Open the front bonnet and locate the ignition coils: they are near the air filter housing, to the side of the engine (you can recognise them by the f…
How to Remove Spark Plugs on a Hyundai Elantra
How to Remove Spark Plugs on a Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In this video, see how to remove the spark plugs on a Hyundai Elantra. Pull the lever to open the engine compartment and lift the front bonnet, secur…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos