Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Grandeur Azera
    4. : Disassembly of the headlights of the Hyundai Grandeur Azera

Hyundai Grandeur Azera - Video tutorial

Model: Hyundai Grandeur Azera MK 5, HG - Years 2011-2016
Part: Headlight
Operation: Disassembly of the headlights of the Hyundai Grandeur Azera

Today we will see, in this video tutorial, how to disassemble and replace the headlights of the Hyundai Grandeur Azera, following the instructions below. First we open the bonnet of our car and start unscrewing all the fixing screws that we find on the upper part of the bumper, as well as the plastic bulkhead; then unscrew the additional screws located on both sides of the wheel arches and under the bumper, as shown in the video. At this point we gently unclip the bumper on the sides to remove it; then unscrew the screws of the front light and disconnect the electrical connector of the bulbs, replacing the optical group!


Posted on 7 November 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos