Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Hyundai Tucson?

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Hyundai Tucson, turn on the ignition to check which tyre has insufficient pressure: inflate that tyre to the recommended pressure value. This value is found on the sticker attached to the driver’s door pillar.

Once the tyre is correctly inflated, turn off and then turn on the ignition again. This will allow the sensor to read the pressure value again, turning off the warning light.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Hyundai Tucson?
How to Reset the Tyre Pressure Warning Light on a Hyundai Tucson?
Hyundai Tucson (2004-2009 / JM, MK 1) To reset the tyre pressure warning light on a Hyundai Tucson, you need to inflate the tyres to the recommended pressure. The correct inflation pressu…
How to Reset the Tyre Pressure Warning Light on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) This guide briefly explains how to reset the tyre pressure warning light on a Hyundai Tucson. To reset the light, ensure all four tyres are inflated …
How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson
How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Today's procedure shows you how to reset the tyre pressure monitoring system (TPMS) warning light on the Hyundai Tucson; before performing the reset,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos