Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Applying Grease to the Ball Joint

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Control arm

See other generations:
Video tutorial

The ball joints of the suspension wishbone are already fitted with a rubber boot containing grease that ensures constant lubrication. Unless the boot is damaged causing grease to leak out, it is not necessary to add grease.

However, especially if the vehicle is used heavily, you may consider applying a grease nipple. At this point, create a threaded hole at the base of the joint to screw in the grease nipple: first, drill a pilot hole, then drill a larger one with a 5.2 mm bit, then use an M6 tap to create the thread, and finally screw in the grease nipple applying Teflon as a seal.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacement of Wishbone Ball Joint
Replacement of Wishbone Ball Joint
Hyundai Santa Fe (2000-2006 / MK 1) If the ball joint of the suspension wishbone fails, consider installing a reinforced type ball joint, equipped with a grease nipple to ensure constan…
Installing a Ball Joint with Grease Nipple on the Suspension Arm
Installing a Ball Joint with Grease Nipple on the Suspension Arm
Hyundai Santa Fe (2000-2006 / MK 1) Replacing the ball joint on the suspension arm with one that has a grease nipple will certainly increase its lifespan as well as driving comfort. Ess…
Instructions for Replacing Drop Links
Instructions for Replacing Drop Links
Hyundai Santa Fe (2000-2006 / MK 1) Wear and/or failure of the spherical joints of the drop links (which are the connecting elements between the anti-roll bar and the shock absorber) re…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos