Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tire with the Spare on a Hyundai Grand I10

Model: Hyundai Grand I10 MK  3, AC3, AI3 - Years 2019-2026
Part: Wheel

In today's video tutorial, we will see the main instructions to remove and replace the tire with the spare on the Hyundai Grand I10. First, open the trunk's rear hatch and start unscrewing the spare tire bolt, taking the entire kit; then lift the vehicle and unscrew the wheel bolts to remove the tire, as shown in the video. At this point, install the spare tire, hand-tightening and cross-tightening the bolts, respecting speed limits especially if installing the emergency spare!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Hyundai Grand I10?
How to Replace the Front Brake Pads on a Hyundai Grand I10?
Hyundai Grand I10 (2019-2026 / MK  3, AC3, AI3) To replace the front brake pads on a Hyundai Grand I10, lift the vehicle so that the wheel corresponding to the pads being replaced is off the ground…
How to Replace the Front Brake Pads in a Hyundai Grand I10?
How to Replace the Front Brake Pads in a Hyundai Grand I10?
Hyundai Grand I10 (2019-2026 / MK  3, AC3, AI3) To replace the front brake pads in a Hyundai Grand I10, lift the vehicle so that the corresponding wheel is off the ground. At this point, loosen the…
How to Replace the Battery in a Hyundai Grand I10
How to Replace the Battery in a Hyundai Grand I10
Hyundai Grand I10 (2013-2020 / MK 2, IA, BA) To replace the battery in a Hyundai Grand I10, open the hood to access the components inside the engine compartment: the old battery is located just …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos