Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Lights Fuse

Model: Hyundai Sonata EF - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Checks and maintenance

See other generations:
Video tutorial

The fuse is an electrical device that protects a circuit from overcurrents (caused, for example, by short circuits). The operation is very simple: the fuse consists of a cartridge with a thin conductor wire that carries the nominal current of the circuit being protected; this wire is the actual fusible element, with a specific amperage rating.

When an overcurrent occurs, the filament melts, opening the circuit. Therefore, if the bulbs do not light up after replacement, it is likely that the corresponding fuse has blown; the fuse box is located at the lower left of the dashboard on the driver's side; open the cover and remove the yellow fuse holder to replace the 10 Amp fuse with one of the same rating.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Where is the windscreen wiper fuse located in the Hyundai Sonata?
Where is the windscreen wiper fuse located in the Hyundai Sonata?
Hyundai Sonata (2005-2010 / MK 5, NF) In this video, you can see where the windscreen wiper fuse is located in the Hyundai Sonata, which is the first element to check in case of malfuncti…
Where to find the fuses for the rear camera of the Hyundai Sonata
Where to find the fuses for the rear camera of the Hyundai Sonata
Hyundai Sonata (2010-2015 / MK 6, YF) In this short guide, we will see the positioning of the fuse boxes and in particular the rear camera fuse of the Hyundai Sonata. First, we open the c…
We check the alternator fuse if the battery of our car is discharged.
We check the alternator fuse if the battery of our car is discharged.
Hyundai Sonata (2005-2010 / MK 5, NF) In this video, we see how to behave if the battery of our car suddenly runs out, or if the battery light comes on. The car in the video is a 2008 Hyu…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos