Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Hyundai i40

Model: Hyundai I40 MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

Video tutorial

In this tutorial video, see how to replace the cabin filter on a Hyundai i40 by following a few simple steps: first, purchase a new cabin filter. Next, get inside the vehicle, switch off the engine, and pull the handbrake.

The cabin filter in this vehicle is located behind the glove compartment, so lower the glove box and remove all items inside; unscrew the knobs visible on both sides of the glove box. Once these knobs are removed, take out the pin on the outer right side of the compartment.

At this point, the glove box will lower completely, exposing the cabin filter cover; remove the cover, take out the filter, clean the housing, and position the new cabin filter (follow the arrow indications according to the airflow).


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Hyundai i40
Replacing the Cabin Air Filter on the Hyundai i40
Hyundai I40 (2011-2019 / MK 1) This video shows how to ensure that no foreign bodies enter the ventilation circuit of the Hyundai i40. A filter is mounted on the intake that must b…
How to replace the air filter of the Hyundai I40
How to replace the air filter of the Hyundai I40
Hyundai I40 (2011-2019 / MK 1) The following short video tutorial explains how simple and quick it is to replace the air filter on a Hyundai i40 with a 1.7 turbo diesel engine with…
Where is the OBD port of the Hyundai I40 located?
Where is the OBD port of the Hyundai I40 located?
Hyundai I40 (2011-2019 / MK 1) If you are planning to use the OBD port of your Hyundai I40 but do not know where it is located, do not worry because in the following guide you will…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos