Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Number Plate Lights with LED

Model: Hyundai Accent RB, RC, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: License plate light

See other generations:
Video tutorial

Replacing the number plate bulbs with LED types will give the vehicle a more modern and attractive appearance. The replacement is straightforward, but you need to remove the light holder from its position by levering it sideways to retract the plastic fixing tabs.

Once the holder is removed, disconnect the original bulb (T5 fitting) and insert the LED bulb, ensuring it lights up correctly (if not, rotate it 180 degrees). Reposition the bulb and reattach the holder in its place in the boot lid.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulb in a Hyundai Accent
How to Replace the Number Plate Bulb in a Hyundai Accent
Hyundai Accent (2017-2024 / YC, MK 5, HC) In addition to the replacement bulb, to replace the number plate light in a Hyundai Accent, you will also need a flat screwdriver or a similar tool. …
How to replace the brake lights of the Hyundai Accent
How to replace the brake lights of the Hyundai Accent
Hyundai Accent (2017-2024 / YC, MK 5, HC) Below we will see the instructions that will allow us to disassemble and replace the brake lights of the Hyundai Accent, in simple steps. First, we o…
Replace Dashboard Lights on Hyundai Accent
Replace Dashboard Lights on Hyundai Accent
Hyundai Accent (2005-2009 / MK 2, MC) How to remove the interior light of the Hyundai Accent for replacing damaged bulbs or the entire unit? Use a screwdriver to pry between the interior …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos