Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : Resetting tire pressure on a Hyundai Accent.

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 4, RB, RC - Years 2010-2017
Part: Checks and maintenance
Operation: Resetting tire pressure on a Hyundai Accent.

Before resetting the tire pressure warning light on a Hyundai Accent (2010-2017), it is necessary to check the correct pressure of all four tires as indicated by the manufacturer. This pressure is often indicated on a sticker located on the driver's side door pillar. Now let's see the procedure for resetting the light. The task is very simple to perform, as we only need to turn on the vehicle's instrument panel and then press the reset button, located on the switch panel to the left of the steering wheel, and hold it down for a few seconds.


Posted on 11 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Accent 2005-2009 - What does the Hyundai Accent tire pressure warning light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos