Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : How do you reset the partial odometer of the Hyundai Accent?

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 4, RB, RC - Years 2010-2017
Part: Checks and maintenance
Operation: How do you reset the partial odometer of the Hyundai Accent?

To reset the partial odometer of the Hyundai Accent, you need to turn on the instrument panel by turning the ignition key inside the appropriate block: after the panel is turned on, you can verify that the partial odometer is not at zero. To reset it to zero, you will need to hold down the TRIP button, located to the right of the instrument panel, for a few seconds; once the partial odometer displays 0, you can release the button. Additionally, at the end of the operation, you can turn off the instrument panel completely.


Posted on 19 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Accent 2005-2009 - What does the Hyundai Accent tire pressure warning light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos