Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Hyundai IX20

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Car door

In this video, learn how to remove the inner door panel of a Hyundai IX20. Start by prying off the rear part of the internal handle with a screwdriver. Behind it, there is a Philips screw that can be removed with a screwdriver. Do the same for the screw located in the handle, hidden under a cover. Remove the plastic covers from the screws on the sides of the panel, then unscrew the screws underneath. Pry with a screwdriver at the bottom of the panel, then remove the small triangle cover near the mirror. Now you can take off the panel and disconnect the electrical connectors behind it (consider taking a photo to ensure everything goes back in the right place).

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the Hyundai IX20?
What is the Fuse Diagram for the Hyundai IX20?
Hyundai ix20 (2010-2019 / OJ) In this video, we can see the location of the fuse boxes in the Hyundai IX20 and their corresponding diagrams, to consult in case you need to check t…
How to Replace the Battery on a Hyundai IX20
How to Replace the Battery on a Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) Replacing the battery on a Hyundai IX20 is a very simple task that you can do independently, aided by our short video tutorial. The first step is to …
How to Replace the Key Shell of a Hyundai Ix20?
How to Replace the Key Shell of a Hyundai Ix20?
Hyundai ix20 (2010-2019 / OJ) To replace the key shell of a Hyundai Ix20, start by removing the rubber part covering the lock and unlock buttons. Once this rubber part is removed,…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos