Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I20
  6. : How to view the fuse box of the Hyundai I20.

Hyundai I20 - Video tutorial

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Operation: How to view the fuse box of the Hyundai I20.

To view the fuse box of the Hyundai I20, produced from 2008 to 2014, we first need to turn off the car and open the engine compartment, as the fuse box is located inside near the car battery. To view the inside of the box, simply unscrew the cover screws. The fuse diagram will be visible on the cover of the box, while inside the box there are the fuses and their designations. On the cover of the box, there is also a special rigid plastic clamp that you can use if you need to remove a damaged fuse from the box.


Posted on 10 November 2023 by ScegliAuto



What to do if the radio in hyundai i20 does not work
Hyundai I20 (2014-2021 / IB, MK 2, GB) If the radio of your hyundai i20 does not turn on, the first thing to check is that its fuse is not blown. To do this we open the fuse box inside the
Where are the fuses located in the Hyundai I20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) Any fuse of the Hyundai I20 is located inside one of the appropriate fuse boxes that are present on the vehicle: in this car model there are two. The
Hyundai I20 fuses
Hyundai I20 (2014-2021 / IB, MK 2, GB) Let's see where to find the fuse box on a Hyundai I20. We open the door on the driver's side, remove the cover at the bottom of the dashboard to acce

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - Why does the tire warning light come on in a Hyndai I20? Read Answer
    • Hyundai I20 2014-2021 - What does the ESP warning light indicate in a 2015 Hyundai i20? Read Answer
    • Hyundai I20 2014-2021 - How many km does the Hyundai I20 LPG travel with a full tank? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos