Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Boxes on the Hyundai i20

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

Hyundai i20 vehicles, produced from 2008 to 2014, contain a fuse box inside. The fuse box is located inside the cabin, specifically behind the driver's glove compartment next to the OBD port.

To check the inside of the box, you need to remove the glove compartment on which the label describing the fuses inside is placed. To facilitate replacement, disconnect the battery during the replacement and use needle-nose pliers.

Insert a fuse of the same amperage in place of the damaged fuse; otherwise, you could damage the control unit.


Posted on 23 April 2026 by ScegliAuto


Related tutorials

How to Access the Fuse Box of the Hyundai i20
How to Access the Fuse Box of the Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) To access the fuse box of the Hyundai i20, produced from 2008 to 2014, first switch off the car and open the engine compartment, as the fuse box is l…
Location and Diagram of the Fuse Boxes of the Hyundai I20 MK1
Location and Diagram of the Fuse Boxes of the Hyundai I20 MK1
Hyundai I20 (2008-2014 / MK 1, PB) The fuse box located inside the cabin of the Hyundai I20 can be found on the left side of the steering wheel (for left-hand drive vehicles), in a dra…
What is the Fuse Diagram for the Hyundai I20 N?
What is the Fuse Diagram for the Hyundai I20 N?
Hyundai I20 (2020-2026 / MK 3, BC3) In this video, you can see where the fuse boxes are located in the Hyundai I20 N and their respective diagrams, useful if you need to check the fuses…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos