Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light on a Hyundai Santa Fe?

Model: Hyundai Santa Fe MK 4, TM - Years 2019-2023
Part: Tail light

To remove the rear light on a Hyundai Santa Fe, open the tailgate to access the plastic panel next to the light unit. Use a tool like a screwdriver to pry off this panel and locate the two screws underneath. These screws must be fully loosened so that the light can be extracted from its housing by disconnecting the connector at the back; connect the new light unit, insert it into its place, and secure it properly.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of the Hyundai Santa Fe?
How to Remove the Front Headlamp of the Hyundai Santa Fe?
Hyundai Santa Fe (2012-2018 / MK 3) To remove the front headlamp of the Hyundai Santa Fe, loosen all the screws that secure the front bumper to its housing: these screws are located at …
Removing Front Headlight Bulbs on Hyundai Santa Fe
Removing Front Headlight Bulbs on Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) Remove the front headlight bulbs on a Hyundai Santa Fe. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the…
How to Replace Headlight Bulbs on a Hyundai Santa Fe
How to Replace Headlight Bulbs on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Need to replace damaged bulbs on a Hyundai Santa Fe? Let’s see how to do it. Open the bonnet by pulling the lever located at the bottom right of the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos