Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : How to understand if it is necessary to change the lock of the trunk door of a Hyundai I20.

Hyundai I20 - Video tutorial

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Bodywork
Operation: How to understand if it is necessary to change the lock of the trunk door of a Hyundai I20.

In this video, we will see how to understand if we need to change the electric lock of the Hyundai I20's hood. In fact, the trunk is stuck and cannot be opened with the remote control. The YouTuber has removed the screws from the inside of the trunk, in order to easily remove the rear panel. There would also be the possibility, by inserting the key into the internal slot, to try manual unlocking, but in our case, this is also blocked. Even by giving it a push, we can see that the mechanism does not respond, so we will have to disassemble it and replace it. We can easily find the part on various e-commerce sites, such as neryuscarparts or ovoko.it, and it costs less than 40.00 euros. Now, we need to remove the gear by removing two screws on one side and one on the other. Let's reassemble it, put the connector back in place, and give it a push. It works! Let's put the panel back in place, and we're done.


Posted on 28 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos