Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb in the Interior Light of a Hyundai i20

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part: Interior dome light bulb

Here’s how to replace the bulb in the interior light of a Hyundai i20: use a screwdriver to pry between the interior light and its frame (without breaking the plastics), pull the interior light out from the panel and disconnect the power connector (if removable). Replace the damaged bulb with a new one (same size and voltage). Refit the interior light into its housing (push the transparent plastic with your hands until the clips lock into the side plastic). Test the correct operation of the interior light after installation.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Hyundai I20
How to replace the rear headlight bulb of the Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Replacing the rear headlight bulb on a Hyundai I20 car is a simple and quick operation to be carried out independently. To perform the replacement, w…
Replacing the Bulb on a Hyundai i20
Replacing the Bulb on a Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) Follow these steps for replacing the bulb on a Hyundai i20. Open the bonnet by pulling the lever located at the bottom right of the dashboard and sec…
How to Replace the Front Headlamp Bulb on a Hyundai i20
How to Replace the Front Headlamp Bulb on a Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) To replace the front headlamp bulb on a second-generation Hyundai i20, open the bonnet and locate the rear of the headlamp unit. Remove the rubber or…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos