Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Fuel Flap on a Hyundai Santa Fe?

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel cap

See other generations:
Video tutorial

On the Hyundai Santa Fe, the fuel flap may become stuck, for example, due to a problem with the release button or the lock actuator. In these cases, you can perform an emergency opening by following the simple procedure shown in this tutorial.

First, open the boot lid, then locate the small panel on the left side and remove it using a flat screwdriver. Next, grab the cord and pull it towards you to unlock the flap and allow refuelling.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Open the Fuel Filler Flap on the Hyundai Santa Fe
How to Open the Fuel Filler Flap on the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Today, you will learn how to open the fuel filler flap on the 2018 Hyundai Santa Fe. The first step is to get into the vehicle and sit in the driver'…
How to Replace the Fuel Level Sender in a Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) To replace the fuel level sender inside the tank of a Hyundai Santa Fe, you need to completely remove the rear seats by unscrewing the bolts that sec…
Where is the OBD2 Port on the Hyundai Santa Fe?
Where is the OBD2 Port on the Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) If you own a first-generation Hyundai Santa Fe and are wondering where the OBD2 port is located for connecting to the ECU, follow the steps described…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos