Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : How to replace the bulbs of the air conditioning controls of the Hyundai Accent

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 1, LC - Years 1999-2005
Part: Car stereo
Operation: How to replace the bulbs of the air conditioning controls of the Hyundai Accent

Below we will discover the necessary instructions to disassemble and replace the bulbs of the air conditioning controls of the Hyundai Accent. First of all, we get on board the car and start by removing the central air vents and the ashtray; then we unscrew the fixing screws that we find on the sides, also removing the air conditioning controls and disconnecting the electrical connectors found on the back, as shown in the video. At this point, we replace the bulb bulbs of the air conditioning controls; finally, we reassemble the panel and all the other components of the dashboard!


Posted on 14 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Accent 2010-2017 - Why does the radio of the 2017 Hyundai Accent not turn on? Read Answer
    • Accent 2010-2017 - How to reset the car radio in Hyundai Accent? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos