Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the key and replace the shell of the Hyundai Sonata

Model: Hyundai Sonata LF - Years 2015-2019
Part: Key

Let's briefly see the process of disassembling the key and replacing its shell for the Hyundai Sonata. First, take the remote control and start prying on the sides to remove the back cover; then open the remote control in two parts, subsequently removing the electronic board and the battery, as shown in the video. At this point, transfer all the components to the new key shell, positioning them perfectly in order; then reassemble the remote control and check its operation, following the video tutorial until the end!

Posted on 6 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on a Hyundai Sonata
How to Replace the Key Fob Battery on a Hyundai Sonata
Hyundai Sonata (2020-2026 / DN8) To replace the battery in the key fob on a Hyundai Sonata, press the lever on the back of the fob and extract the mechanical key. In the gap created,…
How to open the hood of a Hyundai Sonata
How to open the hood of a Hyundai Sonata
Hyundai Sonata (2015-2019 / LF) The opening of the front hood of the Hyundai Sonata follows simple and quick steps. In fact, to open the hood, we must open the driver's side door, l…
How to Open a Stuck Boot on a Hyundai Sonata
How to Open a Stuck Boot on a Hyundai Sonata
Hyundai Sonata (2020-2026 / DN8) Today, we will go through the steps to open a stuck boot, such as in the case of a flat battery, on a Hyundai Sonata. First, open the left rear door …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos