Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Hyundai Tucson

Model: Hyundai Tucson TL, MK 3 - Years 2015-2021
Part: Tire pressure warning light

Resetting the tire pressure warning light on the Hyundai Tucson is a very simple operation that can be done independently. To reset the TPMS light, we must first check the pressure of each tire and set it according to the instructions provided in the manual or on the sticker placed on the door by the manufacturer. Once all the values are adjusted and the tires are checked for any holes, we proceed to reset the warning light. We then get into the vehicle, start the engine, and drive approximately 50 km, increasing the engine speed. After doing this, the light will have been reset.

Posted on 18 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Hyundai Tucson
How to reset the tire pressure sensor of the Hyundai Tucson
Hyundai Tucson (2022-2026 / NX4, MK 4) Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we ge…
How to Reset the Tyre Pressure Warning Light on a Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) This guide briefly explains how to reset the tyre pressure warning light on a Hyundai Tucson. To reset the light, ensure all four tyres are inflated …
How to Reset the TPMS Light on the Hyundai Tucson
How to Reset the TPMS Light on the Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) Today, see how to check the tyre pressure and reset the TPMS light on a Hyundai Tucson vehicle. To check the tyre pressure, connect an air compressor…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos