Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Infiniti QX60 2020 key

Model: Infiniti QX60 L50 - Years 2013-2020
Part: Key

To correctly replace the battery located inside your Infiniti QX60 (year 2020), you must follow all the steps described in our new guide. First of all, make sure you have a flathead screwdriver and a new CR2032 button battery available. At this point, locate the small button located on the back of the cover and press it to remove the physical emergency key. Then use the flathead screwdriver to remove the back cover and remove the exhausted battery. Finally, insert the new battery and reassemble the back cover.

Posted on 24 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery in the Infiniti QX60 key.
How to replace the battery in the Infiniti QX60 key.
Infiniti QX60 (2013-2020 / L50) If you own an Infiniti QX60 and want to replace the battery inside the car key yourself, all you need to do is read the following guide and follow th…
How do you replace the battery of the Infiniti QX60 remote control?
How do you replace the battery of the Infiniti QX60 remote control?
Infiniti QX60 (2013-2020 / L50) In order to replace the battery of the Infiniti QX60 remote control, you need to slide the key from the top of the device so that you can leverage it…
How to replace the battery of the Infiniti QX60 key
How to replace the battery of the Infiniti QX60 key
Infiniti QX60 (2013-2020 / L50) To replace the battery in the key of your Infiniti QX60 on your own, you only need a flathead screwdriver and, of course, a new CR2032 model battery.…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos